Samsung ML-2160 Print a self test report

Samsung ML-2160W
Samsung ML-2165
Samsung ML-2168
Samsung ML-2168W

Samsung Brush firmware repair reset contact Reset999@msn.com

 

Self-test report printing methods

Samsung ML-2160
Instruction for printing reports
Configuration Report
1. Turn on the printer and wait until it is in the Ready state

2. Press and hold button “Stop/Print Screen”

3. Ready state indicator will start to blink after approximately 8-10 seconds

4. Immediately release button “Stop/Print Screen”

5. After this printer should print “Configuration Report”

Supplier Report

1. Turn on the printer and wait until it is in the Ready state

2. Press and hold button “Stop/Print Screen”

3. Ready state indicator will start to blink after approximately 8-10 seconds

4. Continue to hold button “Stop/Print Screen” until indicator starts shining continuously ( approximately 8-10 seconds more )

5. Immediately release button “Stop/Print Screen”

6. After this printer should print “Supplier Report”

CLX-3305 Print a self test report   Dell-1130 Print a self test report   ML-1640 Print a self test report   ML-1660 Print a self test report 

  ML-1670 Print a self test report   ML-1910 Print a self test report   ML-2160 Print a self test report   ML-2240 Print a self test report  

 ML-2520 Print a self test report   ML-2540 Print a self test report   ML-2580 Print a self test report   ML-2855ND Print a self test report  

 ML-5510 Print a self test report   SCX-3200 Print a self test report   SCX-3400 Print a self test report   SCX-3405FW Print a self test report 

  SCX-4300 Print a self test report   SCX-4600 Print a self test report   SCX-4650N Print a self test report   SCX-4728FD Print a self test report 

  SCX-4824FN Print a self test report   SCX-4833FD Print a self test report   CLP-310 Print a self test report   CLX-3170 Print a self test report

 

Samsung Configuration Report Home